3
02. Battery Saving
a) Pressing button #2+4 once will start the battery saving mode and the buzzer
will sound to confirm. The remote control will enter battery saving mode 70sec.
after pressing button #1 to disarm the system. Pressing any button during the
70 sec. or while under in battery saving mode will deactivate the battery saving
mode till next time the system is disarmed.
b) Under battery saving mode, pressing button #2+4 once again will turn off the
battery saving mode and the buzzer will sound to confirm.
03. Vibration and Audible Mode
Pressing button #3+4 once under any mode will switch between vibration or
audible mode.
04. Flash Light
Press and hold button #5 for one second will turn on the flash light for as long as
button #5 is pressed.
05. Powering on the LED Remote Control
When inserting the battery the buzzer of LED remote will sound and then the
blue/red/green LED and white flash light will flash for 0.5 sec. alternately.
06. Blue LED
* Press any button except button #5 and the blue LED will flash for 0.5sec. and the
battery power will be checked at the same time
* Insufficient Battery power is indicated by:
- Blue LED flashes 3 sec. then off
- Buzzer sounds four times
07. Red LED
a) When the system is armed the remote control will beep once and the red LED
flash 15 sec. to confirm.
b) When the system is disarmed, the LED remote will beep two times and the red
