Main burner may now be lit as follows :
a) Light pilot as above and wait 30 seconds.
b) Set thermostat to required temperature.
c) Turn control knob to BURNER ON position
(Figure 1)
and check burner lights.
To Turn Main Burner OFF
Return control knob to pilot position
(Figure 1)
.
This will extinguish main burner whilst leaving pilot lit.
To Turn Pilot Burner OFF
Push control knob in and turn to OFF position.
(Figure 1)
Heat-Up Time
It takes 10 minutes to reach boiling at 100°C from room
temperature.
Turn thermostat control down below boiling temperature
whenever unit is not active use. This will reduce gas and
water consumption.
If unit is not requied in ready-to-cook status for longer
periods then turn control to either pilot only operation or
completely off.
SIT Nova Multifunctional Control
Figure 1
Control knob
Off position
Pilot
position
Burner on
position
Position
Indicator
SECTION 3 - COOKING HINTS
If a basket is immersed, maximum fill corresponds to top
of indicator at pan rear. Take care not to overfill basket.
Set control to desired setting. 70°C, 80°C, 90°C and
continuous boil are marked on control knob.
BE CAREFUL, DO NOT LET THE PAN BOIL DRY.
Use tap to top up with water when necessary to maintain
correct level.
It is recommended that pan water is regularly replenished
to provide a clean cooking medium as starch builds up
when cooking pasta.
DO NOT SWITCH THE UNIT ON UNLESS THE PAN IS
FILLED WITH WATER. MINIMUM WATER LEVEL IS
INDICATED AT PAN REAR.
DO NOT LEAVE BASKETS IN BOILING WATER FOR
UNNECESSARY PERIODS OF TIME AS THE
HANDLES WILL BECOME VERY HOT.
IMMEDIATELY MOP UP ANY WATER SPILLAGES THAT
OCCUR FROM THE FLOOR.
Figure 2
