Falcon FDS-Wi, Руководство пользователя

Страница: 52 / 76

www.rletech.com 52 970.484.6510
4
Web Interface – Integration Version
4.2.2 Network and Web
The Network and Web section displays the MAC Address and allows users configure common
network information
Figure 4.8 Network and Web Section
Ethernet Packet
Repeat
Use this feature to allow the Wireless Gateway to transmit sensor
information over the network (via port 6767) to another Wireless
Gateway.
Enable or disable this option.
Select enabled or enabled with labels and enter the IP address of
the Wireless Gateway to which you wish to send the sensor
information.
Alarm Reminder Use the Alarm Options setting to set the Wireless Gateway re-
alarm function. The device will re-send an alarm after a point has
been in alarm for a certain number of hours.
Select a re-alarm time from 1–24 hours. Set the re-alarm time to 0
to disable the feature.
Option Description
IP Address The Wireless Gateway is shipped with a default IP Address of
10.0.0.188. Contact your IT Department for an appropriate IP
address, if you wish to change this field.
Subnet Mask The Wireless Gateway is shipped with a default Subnet Mask of
255.255.255.0
Default Route The Wireless Gateway comes with a default Gateway Route of
10.0.0.1. Contact your IT Department for help with this setting.
Table 4.4 Network and Web Section Options
Option Description
Table 4.3 Wireless Section Options (continued)