22
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Australia
Checking the parts
4 pan supports
Griddle plate
Grill pan and trivet
Levelling tool
Handyrack
Roasting tin
2 flat oven shelves and 2 drop
shelves.
Splashback & Plinth
Conversion kit from Natural
gas to Propane gas
Hand rail and door handles
Restraining chain and hook
Stability bracket
Positioning the Cooker - Clearances
(see AS 5601/AG 601)
1. Overhead - Measurement A
The minimum height of any surface above the cooker is
650mm above the hotplate.
Range hoods and exhaust fans shall be installed in
accordance with the manufacturer’s instructions. However,
in no case shall the clearance between the highest part of
the hob of the cooking appliance and a range hood be less
than 650 mm or, for an overhead exhaust fan, 750 mm.
2. Side clearances - Measurements B & C
Where B, measured from the periphery of the nearest
burner to any vertical combustible surface, or vertical
combustible surface covered with toughened glass or sheet
metal, is less than 200 mm, the surface shall be protected
to ensure that the combustible surface does not exceed
65ºC above ambient*. Even with the surface protected,
the dimension B should not be less than 135mm above
hotplate level.
*The fixing of 5mm thick ceramic tiles to the surface, or
attaching fire resistant material to the surface and covering
with sheet metal with a minimum thickness of 0.4mm to
a height C of not less than 150 mm above the hotplate,
should satisfy this requirement.
Содержание Elan
