Falcon Elan, Руководство пользователя

Страница: 21 / 40

21
Installation
Dear Installer
Before you start your installation, please complete
the details on the previous sheet. This is so that,
if your customer has a problem relating to your
installation, they will be able to contact you easily.
You must be aware of the following
safety requirements & regulations
The cooker must be installed in a well-ventilated
space, as specified in:
‘AS 5601/AG 601 - Gas Installations’.
The installation must also be in accordance with
all local gas fitting regulations, municipal building
codes, electrical wiring regulations and any other
relevant statutory regulations.
In your own interests and those of safety, it is law
that all gas appliances be installed by an authorised
person. Failure to install the appliance correctly
could invalidate any warranty or liability claims and
lead to prosecution.
Before installation, ensure that the cooker is
suitable for your gas type and supply voltage. See
the data badge. This appliance can be converted for
use on Propane.
Warning: where this appliance is installed in
marine craft or in caravans, it shall not be used
as a space heater.
This appliance is designed for domestic cooking
only. Use for any other purpose could invalidate
any warranty or liability claim.
Ventilation Requirements
The room containing the appliance should have an
adequate air supply.
An appliance should be installed in a location for
complete combustion of gas, proper flueing and to
maintain ambient temperature of the immediate
surrounding at safe limits, under normal operation
condition.
Failure to install appliances correctly is
dangerous and could lead to prosecution.
Location of Cooker
The cooker may be installed in a kitchen/kitchen
diner but NOT in a room containing a bath or
shower.
Conversion
All models are supplied by default for use with
natural gas. A conversion kit for use with Propane
is included with the appliance. See the instructions
that are supplied with the conversion kit, and
included in these instructions.
After converting the appliance, please attach the
Gas Conversion sticker over the appropriate area
of the data badge. This will identify the gas type for
which the appliance is now set.
You will need the following equipment to
complete the cooker installation satisfactorily:
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with
the relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit
(only required if fitting the cooker on a
stone or concrete floor)
3. Rawlplugs
(only required if fitting the cooker on a
stone or concrete floor)
4. Screws for fitting stability bracket
5. Pencil
6. Steel tape measure
7. Cross head screwdriver
8. Flat head screwdriver
9. 4mm & 3mm Allen keys
10. Spirit level
11. Adjustable spanner
Australia
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.