Falcon E2102, Инструкции по установке и обслуживанию

Страница: 9 / 20

Figure 2
2.5 ASSEMBLY OF SPLASHPLATE and PLATESHELF
a) Insert plate shelf standards (A) into large square holes in hob rear and press fully
home.
b) Position splash plate (B) in position with brackets resting upon and locating over
rear hob upstand.
c) Push splash plate back against standards with a spacer (F) held behind each slot
at splash plate top.
d) Insert screw (D) and washer (E) through either slot and spacer. Secure within
tapped hole of each standard.
e) Position plate shelf (C) upon horizontal arms of standards. Push it to rear and
secure to either arm using fixings provided.
f) From rear, secure standards to unit using M8 bolts and washers - 4 off (H & J).