SERVICING WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
27
17 To Adjust the Oven Door Catch Keeper
a) Open the oven door and slacken the locknut at the
keeper base.
b) Adjust the keeper inward or outward as required, until
the desired door operation is obtained.
c) Re-tighten the locknut.
18 To Remove the Hotplate Spark Generator
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
appliance rear. Remove the fi xings that secure the cover
and lift it clear.
b) Undo the terminal connections noting their positions.
c) Undo
the
fi xings that secure the spark generator and
remove the device.
19 To Remove the Hotplate Electrode Leads
Disconnect from the electricity supply.
Pull the unit forward to access the rear of the appliance.
a) Remove the pan supports, hotplate accessories and
burner heads.
b) Remove the hotplate as detailed in Section 2.
c) Remove the cover box and disconnect all HT leads at the
generator.
d) Remove the lower back panel and disconnect the lead at
the electrode.
e) Pull the sleeved bundle of HT leads up through the rear
upright.
f ) Pull the appropriate lead from the sleeve and push in the
replacement.
g) Replace the leads in the rear upright.
h) Re-connect the leads at the generator and oven
electrode.
j) Re-assemble in reverse order and check ignition.
20 To Remove Oven Inner Back
a) Open the oven door. For the LH oven unscrew the 2
thermostat phial fi xing screws. Remove the fi xings that
secure the inner back to the oven rear.
b) Lift the removable panel away.
c) Re-assemble in reverse order. Ensure that the retaining
fi xings are fully tightened.
21 To Replace an Oven Fan
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the rear
of the appliance. Remove the fi xings that secure the cover
and lift it clear.
b) Remove the fan wiring, noting the connection positions.
c) Remove the inner back as detailed in Section 20.
d) Hold the fan blades and undo the centre nut (LH thread),
brass washers, fan blade and circlip.
e) Undo the fi xings that retain the fan and remove it from
the cavity rear.
f ) Fit the replacement and re-assemble parts in reverse
order. Check that the oven operates satisfactorily.
22 To Remove an Oven fan Element
Disconnect the appliance from the electricity supply.
a) Remove oven inner back (see 20).
b) Remove 2 screws from the top of the element and 1 from
the bottom of the element in side the oven.
c) Lift element out carefully, disconnect the terminals
connected to the element noting their positions. If it
is not possible to disconnect the leads in this way, pull
cooker forward to gain access to the rear, remove screws
securing the electric cover to the back sheet and remove
cover and disconnect the terminals from the rear.
d) Fit new element, and reassemble in reverse order.
e) Check that the oven operates correctly.