42
English
The Wok burner
The Wok burner is a little more complicated but it also can
be taken apart for cleaning.
Wok burner
A inner burner cap,
B
outer burner cap
C inner burner head
D
outer burner head
E Wok burner base
When reassembling the Wok burner, turn over the large
base ring and fi nd the ‘D’ shaped area.
Turn the head until the ‘D’ matches the one on the burner
base. Turn the head over and place it on the burner base.
To fi t the small inner burner, fi nd the larger electrode notch
in the burner rim. Line this up with the white ignition
electrode and place the inner burner on the large base ring.
A electrode notch
B
ignition electrode
Now fi t the two burner caps, making sure that they are
sitting down properly.
Grill
The grill pan and grid should be washed in hot soapy water.
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the grid by using a nylon
brush. Alternatively the grill pan can be washed in a dish
washer.
To remove the grill pan support frame, pull the grill pan
forward.
Lift the grill pan clear of the support frame. The support
frame is held to the side rails by two clips on each side.
For each side, support the side rail with one hand and with
the other hand lift the frame up and out of the side clips.