Falcon 1092 CKR Dual Fuel Deluxe, Руководство пользователя и инструкции по установке и обслуживанию

Страница: 24 / 36

SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
24
Retighten the hinge screws.
Effect of hinge adjustment – exaggerated for clarity
Centre line of hinge pin
Oven door omitted for clarity
Loosen the bottom hinge fixing screws and use the
notch and a flat bladed screwdriver to move the position
of the hinge to set the hinge position. Retighten the
hinge screws.
Effect of hinge adjustment – exaggerated for clarity
Centre line of hinge pin
Oven door omitted for clarity
Customer care
Please inform the user how to operate the cooker and
hand over these instructions.
Thank you.
Conversion to LP Gas
Servicing - warning
This conversion must be performed by a competent
person. After conversion the installation must comply
with the relevant regulations and also the local
electricity supply company requirements. Read the
instructions before converting this appliance.
Failure to convert the appliance correctly could
invalidate any warranty or liability claims and lead to
prosecution.
This instruction must be used in conjunction with
the rest of the appliance instruction, in particular
for information on Standards, cooker positioning,
connection hose suitability etc.
When servicing or replacing gas-carrying components
disconnect from gas before commencing operation and
check appliance is gas sound after completion.
Do not use re-conditioned or unauthorised gas controls.
Conversion
Disconnect from electricity and gas before servicing.
Check appliance is safe when you have finished.
This appliance is CAT II 2H3+. It is supplied set for G20
natural gas at 20millibar
A conversion kit for LP gas is supplied with the cooker.
Injectors
Remove pan supports and burner heads.
Burner head
Brass venturi
Burner base
Burner ring
Undo the large brass nuts and remove the brass venturis
and brass rings.
Either:-
Use a long box spanner to access and remove the
old jets.
Or: -* see section 2 “Servicing”
Remove hotplate, lift up the front of the hotplate
top and prop it up. The burner bases are now
accessible - remove the old jets.
Save the jets removed from the appliance for possible
future use. Fit the new jets, see the table for the correct
type.