BOLERO-LT Hardware Description
Version 1.0.6
4.4 NMEA data message
The BOLERO-LT device delivers data in the NMEA-0183 format.
Table 4
below lists each
of the NMEA output messages and FALCOM developed its own protocols supported by
the BOLERO-LT terminal and a brief description.
For further description about NMEA,
see
Related documents[4]
.
The running firmware offers the possibility to switch on or off each protocol listed
in the table below. With the help of PFAL commands supported by the
firmware these protocols can also be transferred via
Serial, SMS, TCP, Data
call
and
E-mail.
NMEA
Description
GGA
Time, position and fix type data.
GLL
Latitude, longitude, UTC time of position fix and status.
GSA
GPS receiver operating mode, satellites used in the position solution and DOP values.
VTG
The number of GPS satellites in view satellite ID numbers, elevation, azimuth and SNR values.
GSV
The number of GPS satellites in view satellite ID numbers, elevation, azimuth and SNR values.
RMC
Time, date, position, course and speed data.
FALCOM
Description
IOP
The status of the digital/analog inputs and output ports and battery voltage (if battery available)
GSM
The GSM operator, reception, registration status, GSM field strength, area code and cell ID.
AREA
The state of 32 areas
3DP
The state of the motion Sensor (hardware option)
BIN
User protocol including time, date, position, course and speed data.
Table 4
: NMEA and FALCOM Output Messages
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 20
