BOLERO-LT Hardware Description
Version 1.0.6
4 TECHNICAL DATA
4.1 General specifications of terminal BOLERO-LT
Supply voltage range:
➢
Operating power supply voltage range of +10.8 V
to +32.0V, suitable for direct connection to an
automotive +12V or +24V DC power source (car
battery).
Power saving :
➢
7 different energy-saving modes
-
programmable with
PFAL commands. For more details about about the
description of power saving modes see chapter
5.1.3,
"Power saving"
.
Operating temperature range:
➢
-40 °C to + 85 °C (see chapter
4.1.2
for further
details)
Physical characteristics :
➢
Size:
85 mm x 56 mm x 20 mm (W x L x H)
➢
Weight:
ca. 90 g
➢
C
able length:
1 m
Physical Interfaces :
➢
Six-wire cable with an 6-pin connector on the end:
✔
1 x I/O (firmware-controlled as
digital input/output
or
analog
inputs, by default it is an input)
✔
1 x Ignition (with software - controlled feature),
✔
1 x Power supply (with software - controlled
feature)
✔
1
x Serial port
(Rx, Tx),
Baud rate
4800...115200 bps
(default=57600 bps)
controlled by firmware, 8 data
bits, no parity, 1 stop bit, no flow control,
➢
SIM Card interface (for
1.8 V
and
3 V
SIM cards)
➢
3 X LED indicators (free-programmable by the
software)
Hardware options :
➢
20 parallel channel low-power GPS core
(based on
SirfStarIII chipset)
➢
3
D motion
sensor (Compact motion sensor for
measuring motion in 3 axises)
➢
Rechargeable Li-Polymer battery (see
Ordering
Guide
),
➢
Degree of protection (the housing of the BOLERO-LT
offers
IP65 protection
from dust and jets of water.)
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 15
