Stainless steel surface (on some models)
Do not use a steel-wool pad, it will scratch the surface.
1. Shake bottle well
2. Place a small amount of professional Stainless Steel Cleaning Polish and
Conditioner on a dry cloth or dry paper towel.
3. Clean a small area rubbing with the grain of the stainless steel if applicable.
4. Repeat as necessary.
Light bulbs
The bulbs are located on the underside of the hood.
To change the light bulbs A:
1. Grasp the bulb on the edges and remove by turning it anti-
clockwise.
2. Replace with the same type and size of bulb
To change the light bulbs B
:
Use a one-edged screwdriver or any other appropriate tool to
lift and remove the overhead light fixture. Replace the
damaged lamp. Use only halogen lamps as the original
specification, avoiding contact with hands. Return the light
fixture to its position (snap fastening)
To change the light bulbs C:
To change the light bulb , Using a flat screw , take off
the bulb and then take off the lamp wires
Installation Instructions
BEFORE YOU BEGIN
Read these instructions completely and carefully.
●
IMPORTANT – Save these instructions for local inspector’s usage.
●
Note to installer – Be sure to leave these instructions with theConsumer.
●
Note to Consumer – Keep these instructions for future reference.
●
Skill Level – Installation of this vent hood requires basic mechanical and electrical
skills.
●
Completion time – 1 to 3 hours.
。
●
Proper installation is the responsibility of theinstaller.
CAUTION:
Due to the weight and size of these vent hoods and to reduce the risk of personal
injury or damage to the product, TWO PEOPLE ARE REQUIRED FOR PROPER
INSTALLATION.
WARNING
:
To reduce the risk of the fire or electrical shock, do not use this range hood with any
external solid-state speed control device. Any such alteration from original factory
wiring could result in damage to the unit and/or create an electrical safety hazard.
AVERTISSEMENT TO REDUCE THE RISK OF THE FIRE, USE ONLY METAL
DUCTWORK.
