Fakir VIGOR PLUS, Инструкция по эксплуатации

Страница: 20 / 24

3. Unscrew the sensor cover using a
small screwdriver, take out the cover
and the sensor.
a. Cover
b. Sensor
c. Sensor box
4. Thoroughly clean the sensor
(especially the emitter, receiver and
the transparent part) and the sensor
box.
a. Cleaning the sensor
b. Cleaning the sensor box
5. Put back the sensor correctly after
cleaning, make sure the plugging
direction is correct.
Frequently Asked Questions
Air quality Surveillance
There is only one LED glowing all
the time with the air quality
surveillance function.
• Indoor air has been clean the whole time
• For testing purpose, dust either
caused by a cigareete or a dusty cloth
can be created near the irritant
sensor. If the level of pollution goes
up, then the unit should be operating
properly.
• The irritant sensor could be too far
away from any irritant for it to detect.
Please locate the unit closer to smoker
or other source of pollution.
The air quality surveillance
indicator always has two LED
glowing.
• Possibly because the room is not
under a closed environment and
pollution keep coming in from the
outside. Or, there has been pollution
created indoor (e.g. smoking) the
whole time. It takes some time to
achieve a clean environment with only
one indicator LED on.
The air quality surveillance function
keeps switching back and forth
frequently.
• Sometimes the Irritant Sensor is
affected by cell phone or other
wireless equipment. When using cell
phone or other wireless equipment,
please stay away from the unit.
Dust and irritant sensor
The dust and irritant sensor keeps
blinking.
• Since the top of the sensor accumulates
more dust, which decrease the
20