Fakir TECHNOSPHERE Smart, Руководство пользователя, Страница: 47 / 128

47
EN
Cleaning of the Collector Cell
WARNING!
The arc is a sharp sound that occurs when large particles are collected in the collector
cell or in the appliance that is used in damp rooms. The collector cell should be cleaned
if long-time and continuous arc occurs.
1. Pull off the electricity plug.
2. Open the front cover by pulling it gently from the top corners.
3. Remove the collector cell by unlocking the upper and lower buttons and pulling it out
firmly.
4. Separate the Collector Electrostatic filter from the pre-electrostatic filter for ease of
cleaning.
5. Place each piece in a location suitable for cleaning in a way that there is no gap.
6. Spray cleaner (detergent, dish soap, etc.) between each cell plate and spread on every
surface. Rinse the collector cell under clean running water properly.
7. Leave the collector cell to dry under sunlight for at least 3 hours. Rinse out the excess
water inside the collector cell to speed up the drying time. When placing the cell back,
make sure that it is not wet and damp.