Cleaning and maintenance
39
Brush roll and cover
For optimal performance, please clean the brush roll
and the cover after each use.
Grab the front handle while pressing the release but-
ton and pull upward to remove. Rinse with water.
Remove the brush roll by grabbing the tab and pulling
upward. Take off the brush roll tab. Remove the hair
and debris wrapped around the roller with the 3 in1
cleaning brush. Rinse with water.
Put the brush roll back into the tool caddy and let it dry
out before reinstalling.
Remove hair and debris from the brush roll chamber
and the opening with tissue or cloth. Put back brush
roll by inserting the brush roll end into the left side of
the foot, then lock the pull tab into place by pressing
downward.
Now put back the brush roll cover:
Press hook
A
into the lock hole
A
, then press hook
B
into the lock hole
B
. Always latch brush cover into
right place to avoid suction loss or water leakage.
A
A
B
B
