Fakir prestige AC 9, Руководство по эксплуатации

Страница: 43 / 56

15
Selection of turbo mode
Timer mode
4. „TURBO“. Only under the state of cooling or heating
mode, press this button, the fan speed is adjusted to strong
automatically and the LCD displays ''TURBO '', the ''TUR-
BO" function is started to reach the highest cooling or hea-
ting.
Note: Turbo function is not available in dehumidification.
5. „TIMER“.
Setting the ''ON"timer time:
a. When remote controller is at off state, press ''TIMER"
button, the LCD displays ''TIMER ON" and the timer
time, the range of setting time is 0 .5h to 24 h.
b. You can press the ''L. " or " v" button to adjust the
timer time, each tauch will be set time to increase or
reduce 0.5h before 10 hours ago, after ten hours will be set
time to increase or reduce 1h per pressing, to enables your
required timer.
c. Press ''TIMER " button again, to set the timer an functi-
on.
d. You can set another function to insure the suitable state
after air conditioner turn on (including mode, temperature,
swing, fan speed and etc). The LCD will displays all your
setting and keep it, when the timer reach to the set time,
the air conditioner will be working according to your set au-
tomatically.
Setting the ''OFF " timer time:
a. When remote controller is at on state, press ''TIMER"
button, the LCD displays ''TIMER OFF" and the timer time,
the range of setting time is 0,5h to 24 h.
b. You can press the ''L. " or '' v " button to adjust the
timer time, each touch will be set time to increase or
reduce 0,5 h before 10 hours ago, after ten hours will be
set time to increase or reduce 1h per pressing, to enable
your required timer.
c. Press ''TIMER " button again, to set the timer off function.
6. „DISPLAY“.
You can let the LCD display working or not by pressing this
button.
Display
Remote control
en