25
EN
Installing the water tank
Place the water tank so that it shall be aligned with the hooks on the block shown in Fig. 1
on the back of the coffee maker at the same time and have it seated by pushing downwards
as shown in Fig. 2. The view after installation of water tank to the appliance shall be as in
Fig. 3.
1
2
3
NOTE!
The water tank shall be placed on the hooks on the block shown in Fig. 1 on the back of
the coffee maker securely. Make sure that the chamber is not left hanging in the air and
that it is placed correctly on the slots.
NOTE!
Maximum volume of the water tank is 2.3 litres.
WARNING!!
Never pour hot water into the water tank. Use water only at room temperature or cold
water.
Filling up the water tank
Fill the water tank with water by lifting the lid of the water tank (3) or removing it and directly
fi
lling from the tap. The red water indicator light on the control panel shall be illuminated
when water in the water tank has run out. You shall add water to the tank in this case,
otherwise you may not brew coffee.
Adjustment of the water amount as per your cup
• Plug the mains cord of your appliance to an outlet.
• Press the On/off button on the side of your appliance so that it shall be brought to ( I )
position.
