HK 2200
EN
15
Operation
Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
When plugged in, turn on the Main power switch at the left side of unit.
When in Standby mode, only ON/OFF on the control panel will respond to your touch.
Press ON/OFF to access the rest of the control panel.
P1
P2
P3
P4
3 Power Setting: 1000W /1300W/2300W
: Press this repeatedly to set a period after which the heater will turn itself off
(between 1 hour – 15 hours)
+ , - : Adjust room temperature which is centigrade & fahrenheit for
selection.Temperature setting from 5-37 centigrade degree and 41-99 fahrenheit
degree,“+” to increase the desired temperature and “-“ to decrease the desired
temperature. When the room temperature reaches lower 7 centigrade / 45 fahrenheit
degree, the heater will frost protection automatic. (Refer to P2/P3/P4)
, turn on or turn off item .
with Fan function,
when you want to use it. It keep
s
working 30 seconds of cool
air after turn off . This design can protect item use longer.
WARNING!
The heater will remain hot for some time after it is
turned off; handle with care.