22
OPERATING
GB
When the appliance is ready for use the steam pilot lamp
(6) lights up.
When using the iron for the first time, iron a plain cloth first.
To obtain steam, press the steam button (10). Release the
steam button when steam is no longer required.
This appliance is also able to generate steam in a vertical
position and can therefore be used to refresh fabrics easily
with a jet of steam.
If the jet of steam decreases while you are ironing, the
boiler tank is running out of water.
How to fill the boiler
while the appliance is
being used
• Switch off the boiler(4). Select the desired temperature
”MIN” by turning the thermostat knobs (9).
• Release the pressure left in the boiler, keeping the steam
button(10) on the iron pressed down until no more steam
comes out of the plate. Then switch off the iron (5).
• Unplug the power cord from the wall socket.
• Wait for the iron and the boiler to cool down.
• Unscrew the cap and wait a few minutes.
• Slowly pour 1.0 litres of water into the opening always
using the funnel provided.
• Close the boiler and fully tighten the cap.
• Press the boiler switch(4).
• Wait for steam pilot lamp (6)to light up before continuing
ironing.
ATTENTION!
Never allow the steam to flow out of the iron
whilst it is resting on the stand provided (8).
CAUTION!
Never attempt to open the cap while the boiler is
under pressure.Never unscrew the boiler cap when
the appliance is connected to the outlet.
ATTENTION!
The boiler is always under pressure!