18
cannot be removed, insert a new
protective motor filter
6.
Insert the dry protective motor filter
back into its holder.
7.
Place protective motor filter into its
receptacle.
8.
Replace the filter cover by hooking it
precisely from above first .Then engage
the lock by pressing it until it audibly
clicks into place.
NOTE:
The filter cover must be inserted
correctly for the dust container to fit
into its mounting bracket. Pressing
firmly will not help if the cover has not
been positioned precisely.
9.
Place the dust container onto the
cylinder vacuum cleaner. Press the
dust container firmly into its mounting
bracket until it audibly clicks into place.
10.
Check whether the dust container is
securely seated.
NOTE:
It may be necessary to push a bit
harder. To make it easier, you can hold
the release button pressed when
inserting the dust container.
Replacing the H.E.P.A. filter
1.
Switch the appliance off with on/off
switch.
2.
Remove every accessorie of the
appliance.
3. Reverse the appliance.
4. Release the
H.E.P.A. filter
cover on
the recessed handle provided for this
purpose and remove it.
5.
Remove the
H.E.P.A. filter
(Fig. 4/4)
6.
Clean the
H.E.P.A. filter
or if it is very
dirty replace it with a new one.
7.
Place the clean/new
H.E.P.A. filter
back into its receptacle. Then insert
the
H.E.P.A. filter
cover by hooking it
in from above first. Lock the cover by
pressing firmly until it audibly and
noticeably clicks into place.
NOTE:
Please wash the H.E.P.A. filter only
one time. Replace the H.E.P.A. filter
at latest every 6 months.
NOTE:
It may be necessary to push a bit
harder. Make sure when doing this that
the cover clicks fully into place behind
both projections provided for this
purpose. Otherwise the cover and
possibly even the exhaust filter will fall
out easily.
Fig. 4/4
