26
USAGE
GB
6. Switch on the cylinder vacuum cleaner using the on/off
switch.
7. Adjust the carpet/hard floor switch depending on the type
of flooring:
• Hard floor laminate flooring, tiles, PVC flooring, etc. (with
brush)
• Carpet long and short pile carpets, runners, etc. (without
brush)
8. To vacuum, pull the cylinder vacuum cleaner behind you
like a sledge.
WARNING!
If the red mark is visible, use the cable retract button to
draw in the cable again up to the yellow mark.
Otherwise the cable can break off. There is a risk of
electric shock.
WARNING!
If you leave your work area, switch off the appliance.
NOTE!
You can quickly reduce the suction power with the
secondary air controller, e. g. to release curtains that
have been sucked in.
NOTE!
The cylinder vacuum cleaner has an overheating
protection device. It will switch off automatically if
overheated (e. g. due to blocked nozzles or overfull dust
container). If this happens, then turn off the Appliance
and remove the plug. Remove the cause of overheating.
Wait approx. 45 min. You can use the cylinder vacuum
cleaner again once it has cooled down.
