Extra Spray Nozzles and Service Pack included:
Qty
1. Operation Arm Fixed Ring
1
2. Bowl
1
3. O-Ring 15.5 x 2.5mm
2
4. Fixed Buckle
1
5. Handle Sealing Ring
1
6. Switch Sealing pad
1
7. Valve Core O-Ring
1
8. Split Sleeve
2
9. Spindle O-Ring
2
10. Spray Head Sealing Ring
3
11. 30 deg Twin Spray Nozzle
1
12. Fan Spray Nozzle
1
13. Four Hole Spray Nozzle
1
8 Spray nozzles may be adjusted by twisting until
the required spray pattern is obtained (from a
mist through to a coarse jet). Additional nozzles
are supplied to provide different spray patterns,
depending on the type of work being carried out.
Do not undo nozzles too far as this will cause
them to leak from the rear.
9 If the nozzle continues to drip after the trigger
handle has been shut off, there is probably air in
the discharge system (nozzle, handle, tap and
hose). Purge the system by turning the nozzle to
jet and operating the trigger on and off in short
bursts, until the liquid shuts off cleanly. Collect
any liquid in a separate container to use later.
FAITHFULL TOOLS
Phoenix House,
3 White Lodge Business Estate,
Hall Road, Norwich, Norfolk, NR4 6DG
E-mail: [email protected]
www.faithfulltools.com
ALWAYS WEAR
SUITABLE PROTECTION
General Safety Tips
■ When using garden pesticides, herbicides, insecticides, fungicides or any other form of
garden chemical always obey the manufacturers instructions fully.
■ Avoid contact with the skin and eyes, do not eat, drink or smoke when using the sprayer.
■ Do not use garden sprayers for the application of flammable liquids.
■ Wear the appropriate protective equipment coverall, gloves, goggles and suitable
respiratory mask.
■ Always direct the spray downwind as spraying into the wind will result in operator
contamination.
■ For details of a complete range of protective equipment that is suitable for use with
garden chemicals visit the SCAN Safety Website at www.scan-safety.com
Looking After Your Sprayer
Blocked Nozzles
If a nozzle becomes blocked or fails to spray the
correct pattern, unscrew the nozzle tip and clean
the components under running water or a water
jet. Do not use a metallic instrument to unblock
a nozzle as this may alter the nozzle aperture
making the nozzle ineffective.
Cleaning
Add a little detergent and some warm water (not
hot) to the sprayer and spray through the system.
Repeat the above operation with clean cold
water. Finally check that the nozzle is free from
any residue. Your sprayer will now be perfectly
clean and ready for its next use. Always dispose
of any unused garden chemicals safely and in
accordance with the manufactures instructions.
After Use
Always release the pressure from the pump
cylinder before storage. Hold or lock the sprayers
trigger in the on position until the pressure in the
pump has been released.
Storage
Store the sprayer under cover and avoid freezing
temperatures. For winter storage ensure that all
fluid is removed from the tank, hose and lance
before storing. Do not store in direct sunlight, in a
greenhouse or any areas where extremes of heat
may occur.
1
2
3
3
5
4
6
7
8
9
10
10
10
9
8
11
12
13
13
12
11
5
6
7
10
3
4
3
2
1
10
8
9
10
