FAirway 72042 Скачать руководство пользователя страница 3

Страница: 3 / 6

2. Attach the enclosure to the top of the windshield.

Find the side release buckle at the top left side of the enclosure and attach it around the

driver’s side front roof post just below the roof. Walk the enclosure around your car and

attach the right top side to the roof post on the passenger side. Don’t worry if the enclo-

sure sags at this point.

3. Attach the enclosure front to the hook strips on the front roof posts.

At the front of your enclosure there is a fabric triangle with three long strips of black loop

material on it. Depending on what type of golf car you have, one of these strips mates to

the hook material you applied to the car front roof posts. (See illustration on this page for

details). Find the correct strip and fold the leading edge of the enclosure to the inside. The

web loops now face forward. Secure the loop strips on the enclosure to the hook strips on

the roof posts.

4. Apply the windshield strap

Locate the plastic bag containing the rip-and-grip and straps and remove the single strap.

(Shown above to the right)

The strap lies across the hood below the windshield and holds the two front ends of the

enclosure together. The C-shaped ends on this strap attach to web loops facing forward at

the bottom of the long black strip on the enclosure front. (See above for the correct loop

to fit your brand of golf car).

Fit the C-Shaped end of the strap into the web loop and the C-Shaped end of the side-

release buckle into the opposite web loop on the other side of the car.

Clip the strap buckle into the buckle end on the web strap and tighten the strap. Slip

excess strap under the strap keeper and slide the strap keeper down toward the end of the

strap.

72042 (page 4 of 7)

12.18.09

Содержание 72042






