Fairland TurboSilence InverX IXCR36, Руководство пользователя

Страница: 17 / 117

For installers and professionals
- 14 -
※
Above data is subject to modification without notice.
2.2.2. Heat pump installation.
➢
The frame must be fixed by bolts (M10) to concrete foundation or brackets. The concrete
foundation must be solid; the bracket must be strong enough and anti-rust treated;
➢
The heat pump needs a water pump (Supplied by the user). The recommended pump
specification-
flux: refer to Technical Parameter, Max. lift ≥10m
➢
When the heat pump is running, there will be condensation water discharged from the
bottom, please pay attention to it. Please insert the drainage tube(accessory) into the
hole and clip it well, then connect a pipe to drain off the condensation water.
2.2.3. Wiring & protecting devices and cable specification
➢
Connect to appropriate power supply, the voltage should comply with the rated
voltage of the products.
➢
Well earth the heat pump.
➢
Wiring must be connected by a professional technician according to the circuit diagram.
➢
Set breaker or fuse according to the local code (leakage operating current ≤ 30mA).
➢
The layout of power cable and signal cable should be orderly and not affecting each
other.
UNIT=MM A B C D E F G H
MODE
L
IXCR36 407 528 390 432 893 280 74 650
IXCR46 407 574 390 432 939 350 74 650
IXCR56 407 630 390 432 995 460 74 750
IXCR66 404 760 384 429 1125 600 74 952
IXCR80 514 710 493 539 1074 640 74 947
IXCR80T 514 710 493 539 1074 640 74 947
IXCR110T 514 900 493 539 1264 650 74 947