Fairhaven Micro Alti 2, Руководство пользователя

Страница: 19 / 24

Audio tones
The lift tone is a “bleep-bleep” that increases in rate and pitch as rate
of climb increases.
The thermal finder tone is a short chirp that increases in frequency
above the glider’s sink rate and the sink tone is continuous tone that
starts high and reduces in frequency indicating sinking air. Use the
Right Sub Menu to customise the vario’s tone response.
Mounting
The Micro Alti can be mounted on your wrist, over a coat sleeve or on
your risers, or it can be panel-mounted in sailplane gliders etc.
We supply a velcro strap that can be cut down as required and adhesive
Velcro pads that will stick to most surfaces and can be sewn onto
clothing. Additionally we supply a lanyard which should be fastened
through the strap retainer on the rear of the Micro Alti and slipped
around your wrist or riser for extra security. Ensure that this will not
entangle with lines or controls.
The strap retainer on the back of the Micro Alti can be fixed
horizontally or vertically or removed if the Micro Alti is mounted
onto a flat surface. Take care when replacing the 4 screws. Engage
the threads by turning the screws slightly anti-clockwise before
tightening. Do not over tighten.