Fairford synergy, Руководство пользователя

Страница: 68 / 233

Synergy Series Soft Start User Manual
MAN-SGY-017. Version 01. 27/06/2016
68
3.10 Input / Output
Menu
Description Min Max Default Unit Reg. Type
PNU 10880
I/O
Digital Inputs
↓
Digital Input Voltage
The digital inputs D1-1I D1-2I
D2-1I are designed to work with
a range of control supplies
230V : 'Active high level' Input
voltage must be in the range
195.5V - 253V
110V : 'Active high level' Input
voltage must be in the range
93.5V - 121V
24V : 'Active high level ' input
voltage must be in the range
20.4V-26.4V
It is important to ensure the
"Digital input Voltage"
corresponds to the voltage
applied to the input.
Failure to do so may result in
damage.
230V 24VDC 230V Read/Write
59392
I/O
Digital Inputs
↓
Control Method
Local Touch Screen : Control
using the button on the keypad
User Programmable : Control
using the terminals. Function
defined in "I/O" menu
Two Wire Control : Control using
terminals. Functions fixed as
shown on screen
Three Wire Control : Control
using terminals. Functions fixed
as shown on screen
Modbus Network : Control via
remote Modbus network or
remote Keypad or Modbus TCP
Local
Touch
Screen Modbus
Network Local
Touch
Screen Read/Write
PNU 10944
I/O
Digital Inputs
Digital Input 1 (D1-1I)
Select Function
Allows the Digital input (D1-1I) to
be mapped to different functions
The selected function will change
in proportion with the input
Digital inputs can only be
mapped if the "Control Method"
is set to "User Programmable"
Off End of list Start/Stop Read/Write
3. Configuration and Parameters (continued)