SMART Temperature Transmitter
PTT74-Ex Series User Manual
Sep.2020
19
www.faraboard .com
FAHM Co
.
Industrial Automation
Doc. PTT74-ExRev99/07M
Wire No
(The number of
sensor element
leads)
Press <M> until this page is appeared on LCD. Then press
<Z> to access the Wire No (programing mode). You can
identify the number of sensor leads by selecting the 2-
Leads (2-L), 3-Leads (3-L) or 4-Leads (4-L) by pressing
<S>. After that, press <Z> until all characters blink. Then
press <M> for the saving new parameter and switching
from programing mode to operation mode.
Calibration Type
(the relation
between input
sensors and output)
Press <M> until this page is appeared on LCD. Then press
<Z> to access the Sensor Calibration Type (programing
mode). You can identify the type of calibration by
pressing <S>. After that, press <Z> until all characters
blink. Then press <M> for the saving new parameter and
switching from programing mode to operation mode.
Sensor Factor
(apply a
proportional factor
to measured value)
Press <M> until this page is appeared on LCD. Then press
<Z> to access the Sensor Factor (programing mode). You
can identify the sensor factor by pressing <S>. After that,
press <Z> until all characters blink. Then press <M> for
the saving new parameter and switching from
programing mode to operation mode.
The available sensor types are as follows:
L-LO
[Linear Low Range] (Range Limit: -125…125mV or 0...500Ω)
L-HI
[Linear High Range] (Range Limit: -125...1150mV or 0…50000Ω)
FREE
[Free Style] (sensor lookup table should be enter using Hart communicator)
PT100
*RTD PT100 α=0.3850+ (Range Limit: -200...850°C)
PT100C
*RTD PT100 α=0.3916+ (Range Limit: -200...850°C)
PT100D
*RTD PT100 α=0.3920+ (Range Limit: -200...850°C)
NI100
[RTD NI100] (Range Limit: -60...250°C)
CU100
[RTD CU100] (Range Limit: -20...150°C)
TH-B
[Thermocouple Type-B] (Range Limit: 250...1820°C)
TH-C
[Thermocouple Type-C] (Range Limit: -18...2315°C)
TH-D
[Thermocouple Type-D] (Range Limit: -18...2315°C)
TH-E
[Thermocouple Type-E] (Range Limit: -250...1000°C)
TH-J
[Thermocouple Type-J] (Range Limit: -210…1200°C)
TH-K
[Thermocouple Type-K] (Range Limit: -250...1372°C)
TH-L
[Thermocouple Type-L] (Range Limit: -200...900°C)