manualshive.com logo in svg

FagronLab BASIC, Руководство пользователя

Поделиться
Скачать
FagronLab BASIC Скачать руководство пользователя страница 35

FagronLab™ BASIC – User Manual  |  35

FagronLab™ BASIC

Notes on safety

•

  FagronLab™ devices must only be connected to grounding type receptacles with 230 V/50 Hz(cps); 120 V/60 Hz(cps) or rated 

country specific voltage installed according to the regulations of DIN VDE 0100 

•

  FagronLab™ devices have been designed for operation under normal room atmospheric conditions. Recommended values: 

Ambient temperature between 15 - 30 °C/ 59 - 86 °F and relative air humidity less than 80 % 

•

  The device should be allowed to acclimatize for approx. 30 minutes at initial commissioning and/or after extended storage time 

in cold rooms 

•

  The FagronLab™ BASIC should be placed to ensure easy access to the power switch and power cable also to avoid use by 

unauthorized persons

•

  Do not immerse FagronLab™ devices in water 

•

  Electronic parts should just be dis- and assembled by a certified service partner 

•

  Only operate the FagronLab™ stirrer inside a closed FagronLab™ jar

•

  Do not touch rotating parts

•

  Keep long hair away from rotating parts

•

  During operation of the FagronLab™ BASIC: always keep long hair, body parts or objects away from the lifting mechanism. 

Immediately turn off the power switch in case of an emergency or pull the power plug

•

  Using the FagronLab™ devices not according to these operating instructions or with line products that the manufacturer did not 

deliver or recommend may impair safety

•

  FagronLab™ devices have not been designed for operation under hazardous conditions. Heed the relevant safety regulations 

when handling hazardous substances (e.g. combustible liquids such as alcohol or similar substances)

•

  FagronLab™ devices correspond to the safety standards for laboratory equipment. They have to be positioned to prevent any 

interference or use by unauthorized persons

•

  The device must not be disposed of in ordinary domestic waste. Please deliver the device to the available collecting and recycling 

systems at the end of its life cycle

Technical data of the FagronLab™ BASIC

Electrical requirement

100 - 115 V / 220 - 240 V

Total power consumption

80 W

Power consumption (mixing motor)

80 W

Operating mode

continous operation S1

Safety class

I

Type of protection

IP 20

Connection

1 RS232 port

Rotational speed controller

in 10 steps electronic controlled

Timer

continuous electronically

FagronLab™ jar sizes

15-20 ml - 500 ml

Weight

22 lbs/10 kg

Dimensions (LxWxH in mm)

255x211x512

Testing certifications

CE

Tab: Technical data of the FagronLab™ BASIC

Содержание BASIC













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды