Fagor LC-400, Инструкция по эксплуатации

Страница: 11 / 50

authorised by the manufacturer and
request the use of original spare parts.
•
If the cable for this appliance is
damaged, contact an authorised
Technical Assistance Service for it to be
replaced.
•
Do not leave the appliance exposed to
the elements (rain, sun, ice, etc.).
•
Do not use or let any part of the
appliance come into contact or near hot
surfaces (kitchen gas or electric hobs or
ovens).
•
Do not use detergents or abrasive
sponges to clean the appliance.
•
Do not touch the hot surfaces. Use the
handles.
•
Do not let the cable come into contact
with the hot parts of the appliance.
•
Before turning the appliance on make
sure that the lid is firmly in place and
that the safety lock handle has been
locked into place. Never release the
safety lock handle whilst the appliance
is in use.
•
If the safety lock handle is not locked
properly, with the lid and the filter
correctly in place, the blender will not
operate.
•
Make sure that the motor of the
appliance has stopped completely
and unplug the power cable before
releasing the safety lock handle and
removing the lid.
•
Never push food into the blender with
your hands or with other objects; only
use the pusher.
•
Do not use the appliance if the filter,
the lid or the safety lock handle are in a
bad condition.
•
The filter is very sharp; handle it very
carefully to avoid cutting yourself.
•
The user should not leave the blender
unattended whilst it is in use.
•
Store the blender well out of reach of
children.
•
When you are not using the appliance,
unplug it from the power socket.
•
Do not blend bananas, avocados,
papayas, mangos or aubergines.
4. BEFORE USING FOR THE FIRST TIME
Before using the blender for the first time,
wash the pusher, the lid, the filter, the
filter holder and the container and rinse
thoroughly. To dismantle the appliance,
follow the assembly instructions in reverse.
5. ASSEMBLY
•
Place the motor
(8)
onto a firm, stable
surface.
•
Place the container
(12)
next to the
motor
(fig B)
.
•
Place the spout
(7)
onto the motor
(8)
as shown in figure C. Adjust the spout
downwards so that the extracted juice
pours into the glass.
•
Fit the filter holder
(5)
onto the motor
(8)
,
so that the two side slots are firmly fixed
to the motor
(Fig. D)
.
•
Insert the filter
(4)
into the filter holder
(Fig. E)
.
CAREFUL: The filter is very sharp;
handle it very carefully to avoid
cutting yourself
•
Put the lid
(3)
on
(Fig. F)
and raise the
safety lock handle
(6)
over the lid. Push
it gently until it locks the lid firmly in
place
(Fig. G)
.
6. OPERATING INSTRUCTIONS
• Make sure that the blender is assembled
correctly and that the safety lock handle
(6) is firmly in place.
• Switch on the blender, place a glass
underneath the spout (7) and press the
on/off power button (9) to turn on the
blender. The indicator light will come on.
• Select the appropriate speed for the kind
of fruit or vegetable you are going to
blend.
- High speed: Press the high speed
button (10) to blend the harder fruits and
vegetables, for example, pineapples,
apples, lemons, peppers or carrots.
- Low speed: Press the low speed
button (11) to blend soft fruits or
10