background image

 

 

 

These instructions have been drawn up for your safety and that of others. You 

are  therefore  requested  to  read  them  carefully  before  installing  and  using  the 
appliance.  Keep  this  instruction  manual  for  future  reference  as  necessary.  If  the 
appliance is sold 

or

 moved, make sure that the manual is handed over to the new 

user

.     

Installation

 

·

Installation of the appliance and its connection to the electrical mains must only be 
carried out by QUALIFIED 

PERSONEL

. Before any procedure, it is important to 

check that the appliance is DISCONNECTED from the electrical mails. 

·

It is risky to modify or attempt to modify the characteristics of this product. 

·

After removing the appliance from the packaging, make sure that it is undamaged 
and  that  the  electrical  lead  is  in  perfect  condition.  Otherwise,  contact  your  dealer 
before putting the appliance into operation.   

·

The Manufacturer declines  all responsibility in  case of failure to  comply  with  the 
accident prevention regulations. 

·

Make sure that air is able to circulate freely around the appliance. Poor ventilation 
produced a shortage of oxygen 

· 

Make  sure  that  the  appliance  is  supplied  with  the  type  of  gas  indicated  on  the 

relative sticker next to the mains gas connection pipe. 

· 

Use of a gas cooking appliance produces heat and moisture in the room in which it 

is installed. Ensure that the room is well ventilated by keeping the air intakes open 
and in good working order or by installing an extractor hood with discharge pipe. 

· 

If  the  appliance  is  used  intensively  for  a  long  time  the  effectiveness  of  the 

ventilation  will  have  to  be  increased,  for  example  by  opening  a  window  or 
increasing the power of any electric extractor fan. 

 

During use 

·

 

This  product  is  designed  to  cook 

food

  inside  ordinary  homes  and  for 

non-professional purposes. It should not be used for any other purpose. 

·

 

After using the appliance, make sure that all controls are in “CLOSED” or “OFF” 

position. 

·

 

If you use an electrical socket close to this appliance, take care that the cables of the 

appliances 

you are using are far away

 from the hot parts of this appliance. 

                                                                                                                                      1 
 

Содержание Hob















Отзывы: