Fagor FXM1 Series, Руководство по установке

Страница: 43 / 174

   3-phase servomotors. FXM
3-PHASE SERVOMOTORS. FXM
Option
s / Exp
ansio
ns
2.
Ref.2105
· 43 ·
FXM|FKM
SERVOMOTOR
2.6 Options / Expansions
Holding brake
FXM servomotors offer an optional holding brake that applies friction on to
the shaft.
Its purpose is to immobilize or lock vertical axes, not to brake a moving
axis. Its main characteristics depending on the type of brake are:
Fan
FXM5/7 series will offer the option for a fan whose main characteristics
are:
IMPORTANT. Before installing a servomotor with a holding brake on
the machine, carefully read all the warnings referring to the servomotor
holding brake detailed in section
3 Storage and 5 Installation in the
chapter on GENERAL PRECAUTIONS of this manual.
WARNING.
NEVER use this holding brake to stop a moving axis.
T- 2/6 Holding brake. Technical data.
SERVO
MOTOR
Holding
torque
Rated
power
absorbed
ON/OFF
time
Unlocking
rated
voltage
Inertia
Approx.
mass
N·m W (hp) ms Vdc kg·cm² kg (lb)
FXM1
Motor
Mo
12
(0.016)
19/29 22-26 0.38
0.3
(0.66)
FXM3
Motor
Mo
16
(0.021)
20/29 22-26 1.06
0.6
(1.32)
FXM5
Motor
Mo
18
(0.024)
25/50 22-26 3.60
1.1
(2.42)
FXM7
Motor
Mo
35
(0.047)
53/97 22-26 31.80
4.1
(9.03)
Note . The maximum turning speed of the holding brake for all series is
10000 rev/min except for the FXM7 series that is 8000 rev/min.
MANDATORY.
A. Never use the holding brake to stop a moving axis.
B. Never exceed its maximum turning speed. See table T- 2/6 .
C. Never apply a voltage higher than top Vdc value given in the table that
would prevent the shaft from turning. Remember that the axis is released
when applying a voltage within the range given in the table for the rated
unlocking voltage.
D. When installing the motor, make sure that the brake fully releases the
shaft before making it turn for the first time.
T- 2/7 Fan. Technical data.
SERVO
MOTOR
Frequency Voltage Power Flow Noise
emission
Speed
Units Hz Vac W m³/h dB(A) rev/min
FXM5/V
50 230 45 325 48 2800
60 230 39 380 52 3250
FXM7/V
50 230 45 325 48 2800
60 230 39 380 52 3250