Fagor FXM1 Series, Руководство по установке

Страница: 13 / 174

   Previous
CONTENTS
In
sta
llatio
n
2.
Ref.2105
· 13 ·
FXM|FKM
SERVOMOTOR
5 Installation
WARNING.
Do not climb on top of the motor nor load it with heavy objects. Ignoring
this warning may cause personal injury.
Do not block either the air intake or the air output in ventilated motors and
prevent strange materials from getting in. Ignoring this warning may cause
fire or damage to the unit.
When unpacking, use the proper tool to open the box. Ignoring this
warning may cause personal injury.
Cover the rotary parts so they cannot be touched. Ignoring this warning
may cause personal injury.
The motor shaft extension is covered with anti-corrosive paint. Before
installing the motor, remove the paint with a cloth dampened in liquid
detergent.
MANDATORY.
When connecting the motor to the machine load, special care must be
taken with centering, the tension of the pulley and the parallelism of the
pulley.
A flexible coupling must be used to couple the motor with the machine
load.
The encoder attached to the motor shaft is a precision element. Do not
apply excessive force on to the drive shaft. The machine must be
designed so the axial and radial loads applied to the shaft extension while
in operation must be within the range indicated in this manual for this
model.
No additional machining must be carried out to the motor.
INFORMATION.
After installing the motor on the machine, we recommend that you break
in the servomotor, holding brake and the components connected to
ensure the proper braking torque and so that the system settles
mechanically and thermally to reduce any possible vibrations and noises
due to internal and/or external tensions. To run in the brake, turn the
motor outside the machine at 1000 rev/min while intermittently engaging
and releasing the brake (t < 1 s) ten times.
i