Fagor FWH-100 Скачать руководство пользователя страница 33

Страница: 33 / 64

Press the

key to activate / deactivate the option to display/hide the total time remaining and

the programme progress indicator on the run screen. By default it is enabled.

1.7.3.3

PAUSE button

Press the

key to hide the pause button so that the user cannot interrupt the programme. By

default this is enabled.

1.7.3.4

Menu button

Press the

key to display /hide the run menu icon. By default it is enabled.

1.7.3.5

Time

Press the

key to activate the option to display / hide the time. By default it is enabled.

1.7.3.6

Advance button

Press the

key to hide the advance button, so that it is not possible to change from one cycle

to the next while a programme is running. By default it is enabled.

Press

to return to the initial configuration screen.

1.8 Automatic shutdown

On the HUD configuration menu screen, in the OPL configuration, press the

key to

enable/disable the automatic shutdown option. If this option is activated and the programmer is on the

main screen, the machine will switch to the Off screen after 30 minutes of inactivity. By default it is

enabled.

1.9 Energy saving

Press the

key to activate the energy saving option, which saves energy by switching off the

screen 10 minutes after the machine has been switched off.

If any part of the screen is touched, the backlight will light up again. Likewise, if the ON/OFF

button is pressed, the backlight comes on and the main screen is opened. By default it is enabled.

1.10 Promotional video

Pressing

the option to activate a promotional video is accessed on the computer screen.

Содержание FWH-100

































































Результаты поиска

Содержание FWH-100

Отзывы:

Похожие инструкции для FWH-100

Бренды по названию

Популярные бренды

Fagor FWH-100, Техническое обслуживание и настройка

Результаты поиска

Содержание FWH-100

Отзывы:

Похожие инструкции для FWH-100

Бренды по названию

Популярные бренды