11
e n g l i s h
9 kg
kWh
5
Environment
4
Troubleshooting
2.8 Start or pause
2.9 Lock .
Hold down the button(s) for 3 seconds
to activate the child lock. It is cancelled by holding
down the button(s) again for 3 seconds.
2.10 Washing and/or drying process.
You can
check the programme stage.
Recommendations for use:
- On installing your washer-dryer, run a preliminary
wash cycle and check it is functioning correctly
(standard wash programme, with no load and at
90ºC).
- Use a wash bag for small items e.g. handkerchie-
fs and underwear.
- You can use all type of detergents allowed to use
in washing machines. Use liquid detergents for low
temperature washing programs (maximun 40ªC)
for all fabric types. Don’t use powder detergent
with wool.
Warnings:
1.
If you stop the washer-dryer by pressing to
add more items, ensure the water level is below
the loading door level.
2.
The additional functions ( and ) increase the
washing time.
3.
When the wash programme ends it is
recommended to leave the loading door open to
air the inside of the washing machine. You may
have to wait 2 minutes before it can be opened.
On models
“a-b”
ensure the STOP pilot light is
flashing. On models
“c”
, wait for the symbol to
switch off.
When the drying programme has ended, the
washer-dryer will be very hot and we therefore
recommend you wait 2 minutes before opening
the door, to avoid burns.
3.1Cleaning the detergent drawer.
You should do
this once a month.
3.2 Cleaning the filter.
You should do this once a
year.
For cleaning the outside
of the washing
machine, use non-abrasive products and dry it
thoroughly with a soft cloth.
4.1
The washing machine includes a troubleshooting
system that detects and warns of any anomalies.
You can observe the warnings on the display, or by
flashing pilot lights on the control panel.
4.1.1 No water is entering the washing
machine.
Check the water supply and the
intake tap, or clean the intake filter.
4.1.2 It is not draining or spinning.
Check
the state of the filter.
4.1.3 It is not spinning.
Redistribute the load
and select spin dry again.
4.1.4 It will not start up.
Check the
loading door is properly closed.
4.1.5 Any other code appears.
Inform
the technical assistance service.
4.2 Vibration or noise.
Check the appliance has
been correctly installed (1.1 and 1.4 of this manual).
4.3 Water remains in the drum.
Check the
detergent drawer is clean (3.1).
The washing machine has been designed with
environmental protection in mind.
Display contrast.
The display dims after 20 minutes
to save energy. To activate the display, press any
button or turn the dial.
Protect the environment.
Load the washing
machine to the maximum recommended capacity for
each programme: this will save water and power.
Avoid using the pre-wash function whenever you
can. Do not use too much detergent. Use the Rinse
plus function for garments belonging to people with
sensitive skin.
Waste electrical and electronic equipment
management.
Do not dispose of these appliances
with the general domestic waste. Take your washing
machine to a special collection centre. Recycling
household appliances avoids negative consequences
for health and the environment and saves on power
and natural resources.
For further information, contact the local authorities
or the shop you bought the washing machine at.
3
Maintenance
