Fagor FI - 48 W, Инструкция по установке, использованию и техническому обслуживанию, Страница: 12 / 28

9
4 USE
4.1 USE OF THE APPLIANCE
FI – 48 W
Set the selector knob (1) (Fig. 7) to the position (120 seconds cycle ) or position (180 seconds
cycle ) .The Pilot light (2) will come on and the rinse and wash water start filling the machine.
Once fill is completed the rinse ( booster ) element will come on , heating the rinse water to a
temperature of ( 185°F +or- 5° ) .Upon reaching the set rinse temperature (3) the tank element
will start to heat the wash water to a temperature of ( 150°F +or- 5° ) . Once the wash
temperature is met (4), the machine is ready for a wash cycle.
To start the washing cycle set the selector knob # 1 to the desire wash time 120 sec. or 180 sec. Setting
and depress the start switch # 5. Note: the start switch will be illuminated until the completion of
the selected cycle.
To empty the tank completely, remove the overflow tube (A) (Fig.13), set selector to position
and depress start button (5) (Fig. 7).
DON’T REMOVE THE ROUND SCRAP BASKET, ONLY
THE TUBE . When the working day is complete set selector knob (1) to the 0 setting.
Fig. 7
FI – 64 W FI – 72 W
Set the selector knob (1) (Fig. 7) to the position (90 seconds cycle ) or position (180 seconds
cycle ) . The Pilot light (2) will come on and the rinse and wash water start to fill the machine.
Once fill is completed the rinse ( booster ) element will come on , heating the rinse water to a
temperature of ( 185°F +or- 5° ) .Upon reaching the set rinse temperature (3) the tank element
will start to heat the wash water to a temperature of ( 150°F +or- 5° ) , once the wash
temperature is met (4), the machine is ready for a wash cycle.
To start the washing cycle set the selector knob # 1 to the desire wash time 90 sec. or 180 sec. setting,
and depress the start switch # 5. Note: the start switch will be illuminated until the completion of the
selected cycle.
To empty the tank completely, remove the overflow tube (A) (Fig.13), set selector to position
and depress start button (5) (Fig. 7).
DON’T REMOVE THE ROUND SCRAP BASKET, ONLY
THE TUBE. When the working day is complete set selector knob (1) to the 0 setting.
3
4
1 2
5