Fagor FG1927, Инструкция по эксплуатации

Страница: 31 / 45

Switch the measurement unit
Remove the battery compartment cover on the device.
Then press and hold the temperature alarm button for one
second to switch the unit between Fahrenheit and Celsius
(the default unit is Fahrenheit).
Set alert temperature
1.Press the power/set button to enter the alert temperature
setting.
2.Press the "+" / "-" button to increase / decrease the value
or hold the button to increase / decrease the value
continuously.
3.Press the power/set button to confirm the setting. Or the
value will be automatically confirmed after ten seconds.
Notes:
When the measured temperature reaches the alert
value you set, the temperature alarm will s
and the value display will keep flashing. Press any button
on the device to s
The temperature alarm is on by default. You can turn off
the temperature alarm by pressing the temperature alarm
button in the battery compartment. The
icon will
display on the screen when the temperature alarm is
turned off.
-30-
tart beeping
top the flashing and beeping.