40i P - Installation/Operation - DRO installation - (23/32)
3.6.2.2
Screen color
Use the cursor keys to change the colors for the background, for the numbers, for the box, etc.
The default box shows the three preset options:
1- Default: Blue background with yellow numbers.
2- Color 1: Black background with yellow numbers.
3- Color 2: Green background, white box and green numbers.
3.6.3
Installer parameters.
Parameters that must be set when installing the DRO for the first time,
when replacing an encoder or when doing a repair. They are
parameters related to the machine, feedback and to the DRO itself.
Enter the password:
231202
3.6.3.1
Parameter backup into USB memory.
If a USB memory is connected, it is possible to save and recover:
- DRO parameters
- Multi-point compensdation tables
- User programs
3.6.3.2
DRO:
It configures the DRO for each type of machine: Number of
axes, type of machine (mill, lathe, etc.).
Pressing this button opens the window shown on the right. The
following items are set in it:
1- Type of machine: Mill.
2- Number of axes to display: 1, 2 or 3.
3- Default units: mm or inches.
4- Toggled by the user: Yes or NO. If set to "YES", to change
the units, select the mm/inch option from the Display drop list
while the DRO is showing the main screen.
5- Configure the probe. It may be configured as inactive, active low (0V) or active high (5V or 24V
depending on type of connection).
ColorSet
Setup
Setup
Install
Setup
Setup
Install
DRO
