Fagor CNC 8070, Конфигурация оборудования

Страница: 111 / 276

Hardware configuration.
CNC 8070
CEN
T
RAL UNIT + MONITOR (Q7-A
PLATFORM).
6.
Ha
rdware
function
ali
ty
(conne
ctors).
·111·
(R
EF
: 1911)
·H62· CFast.
·I23· Local digital inputs (16 inputs).
Additional storage space for user programs.
To help increase storage space, Fagor Automation lists several CFast cards in its catalog; when using
a third-party CFast, always use an industrial grade CFast SLC as these support temperatures from
between -40ºC and +85ºC (-40 ºF and 185 ºF) and can last five years with constant day-to-day writing.
Fagor Automation shall not be held responsible for any problems caused by using lower-quality CFast
cards.
Connector data.
Number of poles. 9.
Pitch. 2.5 mm.
Connection technique. Spring connection.
Minimum/maximum section. 0.14 / 0.5 mm².
Minimum/maximum AWG section. 26 / 20.
Rated current In. 4 A.
Cable data.
Length to be stripped. 8 mm.
See "6.7.1 Digital inputs." on page 115.
Plug-in part. 2 identical connectors 9-pole Phoenix-contact
minicombicon connector (2.5 mm pitch).
• Top connector.
• Bottom connector.
• Both connectors.
Pin. Signal. Function.
1  24 V 24 V DC voltage supply.
2 - 9 LI1 - LI8 Local digital inputs.
Pin. Signal. Function.
1  GND 0 V reference signal.
2- 9 LI9 - LI16 Local digital inputs.