Probing (·T· model).
CNCelite
8058 8060
8065
CANNED CYCLES. CYCLE EDITOR.
4.
Pa
rt m
ea
su
ring
a
lo
ng
the abscissa axis.
ꞏ81ꞏ
R
EF
. 2106
4.5
Part measuring along the abscissa axis.
This cycle measures the part along the abscissa axis. With this cycle, it is also possible to
correct the value of the wear of the tool used to machine the surface. The wear correction
only takes place when the measuring error exceeds a programmed value.
For this cycle, a probe mounted in the tool holder must be used, it must be previously
calibrated with the tool calibration canned cycle.
Data returned by the cycle after the measurement.
Once the cycle has ended, the CNC returns the real values obtained in the measurement
in the following arithmetic parameters:
If wear correction is enabled in the calling instruction, the CNC updates those values in the
programmed tool. This correction is applied only if the measuring error is equal to or greater
than the programmed tolerance.
P298
Actual (real) surface coordinate.
P299
Detected error. Difference between the actual surface coordinate and the
programmed theoretical coordinate.
Содержание CNC 8058elite T
