Fagor AD-48W, Руководство по обслуживанию

Страница: 18 / 29

For Customer Service: Call 1 ‐ 866 ‐ GO FAGOR – www.fagorcommercial.com | P. 16
DETERGENT CONTROL
Use ONLY Commercial Grade, High Temperature, Low Suds Liquid Detergent. Fagor doesn’t recommend any
specific brand name of chemicals. Contact your local chemical distributor for questions concerning your
chemical needs.
All machines come equipped with an internal Detergent and Rinse dispenser.
Take the tube located in the back or your machine marked “Detergent” and place inside detergent
container.
Take the tube with a blue stripe mark and place inside rinse container.
Tubes are clear to provide you a visible means that chemicals are being dispensed.
If desired you can control the amount of Chemical being dispensed by opening the bottom front panel of the
machine. Locate the detergent dispenser (Fig. 9) and regulate according to the flow chart (Fig. 9a). For the
Rinse, turn the button counterclockwise to get more rinse aide and clockwise for less. Verify all connections to
the dispenser are hand tighten to prevent any leaks.
Control and maintain the level of detergent and rinse aid of the tanks. Keep chemical tubing and filters
submerged.
Warning!
If you require the installation of an NON FAGOR Detergent and Rinse pump, a form MUST be fill out prior to
installation by your installer. Failure to do so will void your Warranty. This form can be located inside your
dishwasher. If lost, please contact Fagor to get a copy.
Note: The detergent pump and rinse dispensing pump will only work during the process of fill and rinse.
Oº 220º
1
2
3
4
5
6
7
Fig.9a
Gal./h.
1 0
2 0.06
3 0.20
4 0.40
5 0.53
6 0.66
7 0.80
DETERGENT PUMP
DETERGENT ADJUSTMENT
RINSE PUMP
RINSE PUMP ADJUSTMENT
Fig. 9