Fagor AD - 21 W, Руководство по обслуживанию

Страница: 10 / 22

For Customer Service: Call 1 ‐ 866 ‐ GO FAGOR – www.fagorcommercial.com | P. 10
TURNING THE MACHINE ON
Press and hold the power button (1) for five seconds. LED # 2 will lit up and the machine will start filling up
with water.
PREPARING THE MACHINE
After the machine has filled it will start heating up the rinse tank and the wash tank. The machine is ready to
wash when the thermometer (9) indicates 180 º F (83 ˚ C) and the thermometer (10) 160 º F (71 ˚ C).
It is the user’s responsibility to wait until the minimum temperatures are displayed before putting the machine
to wash.
WASHING
NOTE: All models are fitted with Thermo ‐ stop. The temperature of the incoming water should be higher
than 120°F/ 50 ºC. (Ideal temp. 140°F/60 ºC) If it is lower, the machine's capacity may be affected and you may
have extended cycles.
There are 3 washing cycles for models described before: P1 (3), P2 (5) and P3 (7) of 60, 90 and 180 seconds
respectively. (Fig.7). LED’s numbers 4, 6 and 8 indicate that the machine is working; depending on selected
programme, one or other led will switch on.
If you start your dishwasher prior to your booster heater (9) reaching a minimum of 180 º F
(83 ºC) , YOU WILL HAVE AN EXTENDED WASH CYCLE!
Fig. 7
AD ‐ 21W
2
3
5 7
4
6
8
10
9
1