Fagor 9701, Руководство пользователя

Страница: 30 / 39

Section: Chapter: 4
2
Page
OPERATION WITH 8050 CNC
4.2 FILE NOMENCLATURE
4.2.1 PART-PROGRAMS
They are stored in the PRG\M or PRG\T sub-directories depending on whether they are
for mill or lathe model CNC.
Its name must consist of 6 digits, filling the unused ones with zeros to the left (f.e. 000123).
The PLC programs are an exception and will be named by their corresponding mnemonic.
PLC_PRG PLC Program
PLC_MSG PLC message file
PLC_ERR PLC error file
Depending on the type of machine for which they were created, the part programs will
have one of the following extensions:
PIM When they correspond to mill model CNC.
PIT When they correspond to lathe model CNC.
4.2.2 PARAMETER TABLES
They are stored in the TAB\M or TAB\T sub-directories depending on whether they are
for Mill or Lathe model CNCs.
They are stored in ASCII code and do not have an extension. The names of the tables are
as follows:
MPG General machine parameter table.
MX1-6 Machine parameter tables for the axes. One per axis MX1...MX6.
MPS
Machine parameter table for the main spindle.
MPX Machine parameter table for the auxiliary spindle.
MP1 Machine parameter table for the serial port 1.
MP2 Machine parameter table for the serial port 2.
PLC Machine parameter table for the PLC.
AUM M auxiliary function table.
ML1-6 Leadscrew error compensation tables. One per axis: ML1...ML6.
MC1-3 Cross compensation tables.
ORG
Zero offset table.
TO Tool offset table.
TLF Tool table.
TMZ Tool magazine table.
GUP Global arithmetic parameter table.
LP0-6 Local arithmetic parameter table. One per nesting level: LP0...LP6.
GEO Tool geometry table (only on lathe).
FILE NOMENCLATURE