Fagor 8H-760TCB, Инструкция по эксплуатации

Страница: 52 / 68

OPERATION
Pre-set programmes with quick pre-heat
Some pre-set programmes require the oven to
be pre-heated. They are marked accordingly
in the above table. When you select a pre-set
programme with pre-heating and touch to
confirm, the quick pre-heat pictogram will
be displayed. When the set temperature is
reached, you will hear beeping, which will turn
off when you open the oven door. Place the
food in the oven and close the door, at which
point the actual pre-set programme will start.
Note: It is inadvisable to modify a pre-set
programme during the quick pre-heat phase
as this will cancel pre-set programme and the
appliance will operate with the currently set
function, duration and temperature.
End a pre-set programme.
When a pre-set programme ends, you will
hear beeping.
Oven door
Oven door must be closed during operation.
When you open the door you will interrupt the
active oven function. If the door remains open
for more than 30 seconds, an acoustic signal
will sound to prompt you to close the oven
door. Touch any sensor or close the oven door
to mute the beeping.
If you open the door for less than 10 minutes
the active settings are unaffected. For safety
reasons, after this time, the oven enters the
standby mode (all settings are cleared).
Limit the oven operating time
For safety reasons, the oven operation is time
limited. If the set temperature is up to 100°C,
the oven will enter Standby mode after 10
hours, and if the set temperature is 200°C and
more, the oven operation is limited to 3 hours.
In the temperature range of 101°C to 199°C,
the operation time is limited proportionally
between 3 and 10 hours.
Quick pre-heat
In order to quickly pre-heat the oven, the fan,
fan heater and the roaster are on, and the
appliance operates at it maximum power of
3.6 kW.
Odour catalyst
The catalyst largely removes the odours
emitted from the oven during baking or
cleaning. Touch and hold and at any
time (except in Lighting, Quick oven pre-heat
and ECO) to activate this function. The
pictogram will be displayed. This function is
not automatically resumed when the current
programme ends.
Pyrolytic cleaning
The pyrolytic cleaning function is a special
programme with additional requirements.
When you select the pyrolytic cleaning, the
display shows the pictogram. Touch to
confirm and you can use to select dura-
tion of 2 hours, 2.5 hours or 3 hours. Touch
to confirm and the pyrolytic cleaning will
start. The oven door must be closed. When
the pyrolytic cleaning starts, the oven door is
locked for the duration of the cleaning pro-
gramme and until the oven cavity has cooled
to a safe temperature.
Note:
• If the door is still open when you con-
firm the duration of the pyrolytic clean -
ing, the door lock icon on the display will
flash. If you do not close the door within
10 seconds, the pyrolysis cleaning will
be aborted.
• Before using this function, read the
52