Fagor 8040 CNC - FEATURES Скачать руководство пользователя страница 11

Страница: 11 / 247

EATURES

OFT

M: 7.

)

Page 7 of 48

40 CNC

New variables

12 New variables

Feedrate related variables

FREAL(X-C)

Actual (real) X-C axis feedrate Is read-only from the CNC, DNC and
PLC.

FTEO(X-C)

Theoretical X-C axis feedrate Is read-only from the CNC, DNC and
PLC.

Coordinate related variables

DPLY(X-C)

"Coordinates of the selected axis" displayed on the screen Is read-
only from the CNC, DNC and PLC.

DRPO(X-C)

Position indicated by the X-C axis Sercos drive (Sercos variable
PV51 or PV53 of the drive). Is read-only from the CNC, DNC and
PLC.

GPOS(X-C)n p

Programmed coordinate for a particular axis (X-C), in the indicated
block (n) and program (p).

(P100 = GPOSX N99 P100)

It assigns to P100 the value of the coordinated programmed for
the X axis in label N99 and located in program P100.

It Is read-only and it is only enabled at the CNC. Only programs
located in RAM memory may be consulted.

•

If the defined program number does not exist, it issues Error 69
"Program does not exist".

•

If the defined block number does not exist, it issues error 1060
"undefined label".

•

If the requested axis is not programmed in the indicated block, it
returns the value: 100000.0000

Spindle related variables

DRPOS

Position indicated by the Sercos drive of the spindle. Is read-only
from the CNC, DNC and PLC.

SDRPOS

Position indicated by the Sercos drive of the second spindle. Is read-
only from the CNC, DNC and PLC.

FTEOS

Theoretical spindle turning speed. Is read-only from the CNC, DNC
and PLC.

SFTEOS

Theoretical second spindle turning speed. Is read-only from the
CNC, DNC and PLC.

Speed limit related variables

MDISL

Maximum spindle machining speed. It is read-write from the PLC
and read-only from DNC and CNC.

This variable is also updated with the programmed S value, in the
following cases:

When programming "G92 S" in MDI mode

Содержание 8040 CNC - FEATURES
























































































































































































































































Результаты поиска

Содержание 8040 CNC - FEATURES

Отзывы:

Fagor 8040 CNC - FEATURES, Руководство пользователя, Страница: 11 / 247

Результаты поиска

Содержание 8040 CNC - FEATURES

Отзывы: