GB
- 61 -
CLEANING THE BODY
Never use aggressive or abrasive products to clean
the body or control panel. A damp cloth is sufficient,
with some soap if necessary.
The filter system in this dryer is a removable
element sunk into the lower part of the hatch and is
removed by lifting up and out.
The fibres that collect inside the filter are normal
wear from the fabrics and are not the result of any
malfunctioning of the dryer. The filter can be
cleaned with a toothbrush or a damp cloth.
N.B. DO NOT CLEAN WITH WATER
CLEANING THE HUMIDITY CONTROL PROBE
After numerous drying cycles a thin film of scale
may deposit on the humidity control probe inside
the drum. This film may compromise drying
performance.
Clean the scale off the stainless steel probe with a
cloth and a solution of vinegar and water.
N.B. Failure to implement these safety and maintenance recommendations may
cause serious accidents and irreparable damage to the dryer (corrosion and
fire).
C
CL
LE
EA
AN
NIIN
NG
G A
AN
ND
D M
MA
AIIN
NT
TE
EN
NA
AN
NC
CE
E
