FAG PUMP1000-4L-CONTROL, Руководство пользователя

Страница: 7 / 46

Schaeffler Group Industrial BA 20 7
Hydraulic oil
The only hydraulic oils that can be used are:
■
any hydraulic oils with a viscosity of 32 mm
2
/s at +40 °C.
Only clean hydraulic oil should be used.
If the oil is not clean, this may lead to blockage of the filter fitted.
Warning
Hydraulic oil can cause irritation to skin and respiratory passages.
Skin contact should therefore be avoided, vapours and fumes
should not be inhaled. Eyes must be protected against hydraulic oil.
Maximum pressure
The hand pump delivers a pressure of up to 1000 bar. The maximum
pressure that can be used with a hydraulic nut is 800 bar.
Warning
800 bar must never be exceeded.
The manometer must be monitored continuously during operation.
Ambient conditions
The hand pump should be used under the following ambient
conditions:
■
The surface underneath must be even and capable
of supporting loads
■
Temperature: 0 °C to +60 °C
■
Humidity: max. 90%, no condensation.
Ensure that the ambient conditions are maintained throughout
the operating period.