Unfoldinginstructions
5
Adjust the angle of the handlebar stem to
the position perpendicular to the frame ,
first lock the screws of the stem cover, and
then lock the two screws pointed by the
arrows.
05
7
The left pedal is tightened
counterclockwise and the
right pedal is tightened
clockwise.
Install the seat, adjust it to a suitable
height and fix it with quick release.
6
Seat post
quick release
4
Pass the screws through the
headlight mounting holes and
the fender holes, then tighten
with a tool.
Check whether there is a
gap on both sides of the
disc rotor after locking.
A rod is pierced on the center shaft
of the wheel. Tighten the nuts at
both ends, and then use a wrench to
lock it in a clockwise direction.
3
Take out the front wheel set
and align it with the clearance
of the front brake before
installing it, then install.
Remove the ebike from the
package.
1
Raise the stem and lock it.
2
