fafnir The Cool One, Техническая документация инструкция

Страница: 6 / 14

THE COOL ONE 6
Not inspected system parts of the overfilling safety device must
comply with the requirements of the
certification
principles
specified for overfilling safety devices.
For overfilling safety devices, the specialised company or the
owner-operator of the level sensor is only allowed to use those
system parts without inspection symbols that comply with the
General Design Principles and with the Special Design Principles
of the design and inspection principles specified for overfilling
safety devices.
In case of failure of the auxiliary power supply (exceeding or
dropping below the limit values) or in case of interruption of
the connecting lines between the system parts, overfilling safety
devices must report these malfunctions or indicate the maximum
filling level.
The safety instructions in this instructions manual are labelled as
follows:
If you do not observe these safety instructions, risk of an
accident exists or the level sensor THE COOL ONE could be
damaged.
Useful information that will guarantee proper function of
the sensor or facilitate your work.