THE COOL ONE
5
2
Safety instructions
The level sensor THE COOL ONE serves the purpose of
monitoring liquids in tanks and other containers as well as in
conduits and pipes. Use the sensor for this purpose only. The
manufacturer shall not be liable for any form of damage
resulting from improper use!
The level sensor was developed, manufactured and inspected in
accordance with state-the-art technology and with recognised
technical safety rules and regulations. Nevertheless, hazards may
arise from the use of this sensor. Therefore, observe the
following safety instructions.
Do not change or modify the system or add any equipment
without the prior consent of the manufacturer.
The installation, operation and maintenance of the level sensor
is only allowed to be carried out by expert, authorised
personnel. Only experienced electricians are allowed to install
and service the level sensor. Specialised knowledge must be
obtained by undergoing regular training.
Operators, installers and service personnel must observe all
applicable safety regulations. This also applies to the local safety
regulations and accident prevention regulations not mentioned
in this manual of operating instructions.
For the installation of the level sensor, the response point must
not be located in areas of intensive gas flow.
Following the installation work and when changing the bearing
liquid, an inspection with respect to determining proper
installation and perfect operation must be carried out by an
expert of the specialised company or the owner-operator.
Electric circuits for horns and lamps that cannot be switched
according to the quiescent current principle must be easy to
check with respect to their operability.
Prior to putting the level sensor into service, all the devices of
the limit value indicator must be checked with respect to correct
connection and proper operation. The electrical power supply,
including the supply of the downstream devices, must be
checked.
Содержание The Cool One
Страница 14: ...THE COOL ONE 14 ...
