English
English
5.
Forced switching-on
machine OFF
ON: press PROG
At the end of the programmed switch-on time the following message
will be displayed:
When the machine needs to be used, keep the PROG (
35
) key pressed
down for 10 seconds.
The machine will again be activated for use.
To return to programmed switch-off, check the position of the mains
switch (
1
), disable it, and then return to the previous position.
6.
Drinks distribution - coffee
Remove the filter carrier (
21
or
25
), clean it of the used coffee grounds
and refill it with 1 or 2 doses of ground coffee, according to the filter
carrier used.
Press the coffee evenly in the filter, using the dose-grinder press.
Remove any coffee grounds from the edges of the filter.
Insert the filter carrier (
21
or
25
) to the group, locking it firmly in place.
Position the cup (or cups) under the spout (or spouts) of the filter carrier
(
21
or
25
).
Press the coffee distribution key (
26, 27, 28
or
29
) corresponding to the
desired dose. The corresponding led lights up, the coffee will be issued
and will stop automatically upon completion.
Press the continuous/STOP distribution button (
30
) for a continuous
distribution.
The distribution, both dosed and continuous, may be interrupted at any
time by pressing the continuous/STOP key (
30
).
26
29
28
25
30
27
4.
Time/counter display
Monday 11:00
Boiler pres. 1,20 bar
Monday 11:00
Boiler pres. 1,20 bar
number of selection
press a key
Under normal working conditions, the following message will be
displayed:
N.B.: The working pressure value (set by the installing technician) is
also shown by the switching off of the boiler heating element insertion
indicator light (
3
).
When the PROG (
32
) key is pressed, the following message will be
displayed:
When the message select counters is displayed, if the select coffee,
cappuccino, hot water or milk keys are pressed, the number of times
that key has been pressed is displayed. The number of times each key
has been pressed is shown on the bottom line of the display.
N.B. To reset the various counters, access programming and follow
the procedure provided in Paragraph 5.
When the PROG (
32
) key is pressed, will be again displayed the
message:
When the message relative to the current day and time and the boiler
pressure value is displayed, drinks are dispensed by pressing the coffee,
cappuccino, hot water and milk selection keys.